top of page
whimsical_otter_20822_Cartoon_of_a_pile_of_research_publication_ff35e942-b4c7-438a-a0b4-b9

Peer-Reviewed Publications

Web of Science

  1. Bhuyan S., Designing Thermally Actuated Bimorph as Energy Harvester, Energy Harvesting and Systems, 6(1-2), 2019, 29 – 38

  2. ​Bhuyan S., Tanguy F., Martina D., Lindner A., Ciccotti M., Creton C., Crack propagation at the interface between soft adhesives and model surfaces studied with a sticky wedge test, Soft Matter, 9(28), 2013, 6515 – 6524

  3. Bhuyan S.K., Bradby J.E., Ruffell S., Haberl. B., Saint C., Williams J.S., Munroe P., Phase stability of silicon during indentation at elevated temperature: evidence for a direct transformation from metallic Si-II to diamond cubic Si-I, MRS Communications, 2(1), 2012, 9 – 12

  4. Valverde M., Yoon S., Bhuyan S., Larock R.C., Kessler M., Sundararajan S., Rubbers Based on Conjugated Soybean Oil: Synthesis and Characterization, Macromolecular Materials and Engineering, 296(5), 2011, 444 – 454

  5. Bhuyan S., Sundararajan S., Sheng X., Kessler M., Influence of crosslinking density on the tribological behavior of norbornene-based polymeric materials, Wear, 270(7-8), 2011, 550 – 554

  6. Bhuyan S., Sundararajan S., Andjelkovic D., Larock R., Micro- and nano-tribological behavior of soybean oil-based polymers of different crosslinking densities, Tribology International, 43(11), 2010, 2231 – 2239

  7. Bhuyan S., Sundararajan S., Lu Y., Larock R.C., A study of physical and tribological properties of biobased polymer-clay nanocomposites at different clay concentrations, Wear, 268(5-6), 2010, 797 – 802

  8. Yao L., Hammond E.G., Wang T., Bhuyan S., Sundararajan S., Synthesis and physical properties of potential biolubricants based on ricinoleic acid, Journal of the American Oil Chemists’ Society, 87(8), 2010, 937 – 945

  9. Bhuyan S., Sundararajan S., Andjelkovic D., Larock R.C., Effect of crosslinking on tribological behavior of tung oil-based polymers, Tribology International, 43(4), 2010, 831 – 837

  10. Bhuyan S., Sundararajan S., Pfister D., Larock R.C., Effect of filler composition and crosslinker concentration on the tribological behavior of spent germ particle-based polymeric composites, Tribology International, 43(1-2), 2010, 171 – 177

  11. Bhuyan S., Holden L.S., Sundararajan S., Andjelkovic D., Larock R.C., Effect of crosslinking on friction and wear behavior of soybean oil-based polymeric materials, Wear, 263(7-12), 2007, 965 – 973

  12. Bhuyan S., Sundararajan S., Yao L., Hammond E.G., Wang T., Boundary lubrication properties of lipid-based compounds evaluated using microtribological methods, Tribology Letters, 22(2), 2006, 167 – 172

Conference Presentations

  1. Bhuyan S., Atumo A., “Designing Thermally Actuated Bimorph as Energy Harvester”, 1st International Conference on Recent Trends in Engineering & Technology, 2019, Ambo, Ethiopia

  2. Bhuyan S., Tanguy F., Martina D., Creton C., Lindner A., Ciccotti M., “Crack propagation at the interface between a poly n-butyl acrylate model PSA and model substrate”, 9th Biennial Meeting of the European Adhesion Society, 2012, Friedrichshafen, Germany

  3. Bhuyan S., Tanguy F., Martina D., Creton C., Lindner A., Ciccotti M., “Crack propagation at the interface between a poly n-butyl acrylate model PSA and model substrate”, 35th Annual Meeting of the Adhesion Society, 2012, New Orleans, Louisiana, USA

  4. Bhuyan S., Sundararajan S., Lu Y., Larock R., “A study of physical and tribological properties of biobased polymer-clay nanocomposites at different clay concentrations”, 63rd Annual Meeting of the Society of Tribologists and Lubrication Engineers (STLE), 2008, Cleveland, Ohio, USA

  5. Bhuyan S., Sundararajan S., Pfister D., Larock R., “Effect of filler composition and crosslinker concentration on the tribological behavior of spent germ particles and tung oil-based polymeric composites”, 63rd Annual Meeting of the Society of Tribologists and Lubrication Engineers (STLE), 2008, Cleveland, Ohio, USA

  6. Bhuyan S., Sundararajan S., Andjelkovic D., Larock R., Micro- and nano-tribological behavior of soybean oil-based polymers of different crosslinking densities, International Joint Tribology Conference (IJTC), October 22-24, 2007, San Diego, California, USA

  7. Bhuyan S., Sundararajan S., Yao L., Hammond E.G., Wang T., “Effect of chain length on physical and tribological properties of oleic esters”, 62nd Annual Meeting of the Society of Tribologists and Lubrication Engineers (STLE), 2007, Philadelphia, Pennsylvania, USA

  8. Bhuyan S., Holden L.S., Sundararajan S., Andjelkovic D., Larock R., “Effect of crosslinking on the friction and wear behavior of soybean and tung oil-based polymeric materials”, 62nd Annual Meeting of the Society of Tribologists and Lubrication Engineers (STLE), 2007, Philadelphia, USA

  9. Bhuyan S., Holden L.S., Sundararajan S., Andjelkovic D., Larock R., “Effect of crosslinking density on the wear behavior of soybean oil-based polymeric materials”, 16th International Conference on Wear of Materials, 2007, Montreal, Quebec, Canada

  10. Bhuyan S., Sundararajan S., Yao L., Hammond E.G., Wang T., Boundary lubrication properties of lipid-based compounds evaluated using microtribological methods, International Joint Tribology Conference (IJTC), 2006, San Antonio, Texas, USA

Invited Talks

  1. “Crack propagation at the interface of soft pressure sensitive adhesives and hard surfaces during interfacial debonding”, Indian Institute of Technology Bombay, India, 2013

  2. “Debonding of Pressure Sensitive Adhesives”, Indian Institute of Technology Delhi, India, 2013

  3. “Debonding of Pressure Sensitive Adhesives”, Larsen & Toubro, India, 2012

  4. “Tribology of bio-based polymers and polymeric composites”, Indian Institute of Science, India, 2012

  5. “Wear in bio-based polymers and polymeric composites”, Goodyear Innovation Centre, Luxembourg, 2012​

©2025 by Satyam Bhuyan. Powered and secured by Wix

bottom of page